Last update: Hlinčík Tomáš doc. Ing. Ph.D. (20.09.2018)
The course deals with principles applied in the reduction of air emissions in selected technologies including production of electric energy and heat. The process of reducing emissions to air takes place at individual technological nodes where the possibilities of application of the respective chemical-technological operations leading to the separation of pollutants of the given technology are assessed. Environmental technologies are ultimately described in the balance sheets where the mass and heat flows of the whole technology are captured. Finally the various environmental technologies of air protection are compared both in terms of efficiency and economic criteria.
Last update: Hlinčík Tomáš doc. Ing. Ph.D. (20.09.2018)
Předmět se zabývá principy aplikovanými při snižování emisí do ovzduší u vybraných technologií včetně produkce elektrické energie a tepla. Proces snižování emisí do ovzduší probíhá v jednotlivých technologických uzlech, kde jsou posuzovány možnosti aplikací příslušných chemickotechnologických operací vedoucích k separaci polutantů dané technologie. Environmentální technologie jsou nakonec popsány bilančními tabulkami, kde jsou zachyceny hmotnostní a tepelné proudy celé technologie. Nakonec jsou porovnávány různé environmentální technologie ochrany ovzduší jak z hlediska účinnosti, tak podle ekonomických kritérií.
Aim of the course -
Last update: Machač Pavel Ing. CSc. (29.06.2018)
Students will be able to:
Work with specific technological scheme of the environmental technologies.
Determined key technological currents based on the mass balance of the process.
Specify technological conditions have a significant influence on the separation efficiency of pollutants.
Last update: Machač Pavel Ing. CSc. (29.06.2018)
Studenti budou umět:
Pracovat s konkrétním technologickým schématem dané environmentální technologie.
Určit na základě hmotnostní bilance prcesu klíčové tecnologické proudy.
Specifikovat technologické podmínky, mající významný vliv na účinnost separace polutantů.
Descriptors -
Last update: Machač Pavel Ing. CSc. (29.06.2018)
Technology of control air pollutants, technological flow , mass balance , heat balance, the separation process efficiency
Last update: Machač Pavel Ing. CSc. (29.06.2018)
technologie ochrany ovzduší, polutant, technologický proud, hmotnostní bilance, tepelná bilance, separační proces, účinnost
Literature -
Last update: Machač Pavel Ing. CSc. (29.06.2018)
Z: Vejvoda J., Machač P.,Buryan P., Technologie ochrany ovzduší a čištění odpadních plynů, Praha 2003, ISBN 80-7080-517-X
Z:Warnatz J., Maas U., Dibble R.W., Combustion, New York,1999,3-540-65228-0
Z:Moser et al.Cleair Liquor Organic Acid Flue Gas Desulphurisation System.,U.S. Patent No.5.770.164.June 1998 Chemical Engineering Science.
Z:Frandsen J.B.W., Kiil S., Johnsson J.E., Optimisation of a Wet FGD Pilot Plant Using Fine Limestone and Organic Acids, 2001 Matos, Manuel A.
Z:Córdoba P., Status of Flue Gas Desulphurisation (FGD) systems from coal-fired power Plants: Overview of the physic-chemical control processes of wet limestone FGDs.Fuel. March 2015
D:Vladyka J., Hejduk P., Předávací dokumentace - Laboratoř pro výzkum procesu odsíření spalin, Zkušební absorber, EVECO, s.r.o. 07.2017.,
D: Petrovic MM et al. Proceedings of ecos 2016 - The 29th International Conference on Efficiency. June 19-23, 2016, Portorož. Slovenia
Last update: Machač Pavel Ing. CSc. (29.06.2018)
Z: Vejvoda J., Machač P.,Buryan P., Technologie ochrany ovzduší a čištění odpadních plynů, Praha 2003, ISBN 80-7080-517-X
Z:Warnatz J., Maas U., Dibble R.W., Combustion, New York,1999,3-540-65228-0
Z:Moser et al.Cleair Liquor Organic Acid Flue Gas Desulphurisation System.,U.S. Patent No.5.770.164.June 1998 Chemical Engineering Science.
Z:Frandsen J.B.W., Kiil S., Johnsson J.E., Optimisation of a Wet FGD Pilot Plant Using Fine Limestone and Organic Acids, 2001 Matos, Manuel A.
Z:Córdoba P., Status of Flue Gas Desulphurisation (FGD) systems from coal-fired power Plants: Overview of the physic-chemical control processes of wet limestone FGDs.Fuel. March 2015
D:Vladyka J., Hejduk P., Předávací dokumentace - Laboratoř pro výzkum procesu odsíření spalin, Zkušební absorber, EVECO, s.r.o. 07.2017.,
D: Petrovic MM et al. Proceedings of ecos 2016 - The 29th International Conference on Efficiency. June 19-23, 2016, Portorož. Slovenia
Teaching methods -
Last update: Pátková Vlasta (15.05.2018)
Once a week, two hours of lectures and one hour of exercise.
Last update: Machač Pavel Ing. CSc. (29.06.2018)
Jednou týdně 2 hodiny přednášek a 1 hodina cvičení.
Syllabus -
Last update: Machač Pavel Ing. CSc. (29.06.2018)
Fields of instruction:
Legislation in air protection, principles of separation of solid pollutants from waste gases, pollutants from combustion processes, wet limestone technology of flue gas desulphurization, model of SO2 absorption process into limestone slurry, appliances of environmental technologies, contemporary processes of gas desulphurisation, research of gas desulphurisation processes, denitrification technology air pollution, waste incineration with regard to the formation and separation of pollutants, examples of the use of absorption, adsorption and catalysis processes, biofilters and bioabsorbers, principles of the function of autocatalysts.
Last update: Machač Pavel Ing. CSc. (29.06.2018)
Oblasti výuky:
Legislativa v ochraně ovzduší,principy separace tuhých znečišťujících látek z odpadních plynů, polutanty ze spalovacích procesů, mokrá vápencová technologie odsiřování spalin, model procesu absorpce SO2 do vápencové suspenze, aparáty environmentálních technologií, soudobé procesy odsiřování spalin, výzkum procesů odsiřování spalin, denitrifikační technologie v ochraně ovzduší,spalovny odpadů z hlediska tvorby a separace polutantů, příklady použití procesů absorpce, adsorpce a katalýzy, biofiltry a biopračky, principy funkce autokatalyzátorů.
Entry requirements -
Last update: Machač Pavel Ing. CSc. (29.06.2018)
Chemical Engineering I.
Last update: Pátková Vlasta (15.05.2018)
Chemické inženýrství I.
Registration requirements -
Last update: Hlinčík Tomáš doc. Ing. Ph.D. (20.09.2018)
None
Last update: Hlinčík Tomáš doc. Ing. Ph.D. (20.09.2018)
Žádné
Course completion requirements -
Last update: Machač Pavel Ing. CSc. (29.06.2018)
For successful completion of the course, it is first necessary to achieve at least 50 points in the credit test and to pass the written part of the examination to more than 50 points. It is also necessary to pass the oral part successfully.
Last update: Machač Pavel Ing. CSc. (29.06.2018)
Pro úspěšné zakončení předmětu je nejprve zapotřebí dosáhnout alespoň 50 bodů v zápočtovém testu a splnit písemnou část zkoušky na více než 50 bodů. Dále je nutné složit úspěšně ústní část zkoušky.